i-joy i-Watxer Manual De Instrucciones página 14

（6）Alarm：Press the Enter key to enter the alarm interface
Alarm clock can be set to 5, press the volume up and down keys to select an option, press
the Enter key to enter this list
1） 、Alarm status: Press the Enter key to enter the selection and preservation of the
interface, the default is off, press the Enter key you can choose to open or close, as the
right
such as the right
2） 、Set the time
locations numeric setting, each location can press the volume keys up or down to adjust
the specific numbers, setup is complete press OK to save the settings.
3） Ring type: Press the Enter key to enter the selection and save screen, press the up and
down volume keys can be set once or daily (the default one) or a customized setup is
complete press the OK button to save the settings.
4）Alarm tone: Press the Enter key to enter the alarm tone screen, press the up and down
volume keys can be set to select the alarm tone, setup is complete press the Enter key to
save the settings
Note: Set the alarm is complete, set the alarm if opened, the list box will interface to select
the tick, as shown
Alarm " ," small icons; alarm sound, press the Enter key to stop the alarm.
（7）Power saving: Enter this function to adjust the luminance of display.in order to save
power or not
（ 8 ） About Bluetooth Watch: Enter this function to display BT PHONE version
information.
（9）Automatic Test: Enter this function, Bluetooth watch will be an automatic test
features, including: backlit test, LCD test, test button, earpiece, speaker and microphone
, Setup is complete press the Enter key to save the settings,
.
: Press the switch button to jump to different
, The status bar will be the standby interface
i-Watxer - EN
.
，