1. Manuales
  2. Marcas
  3. Sennheiser Manuales
  4. Receptores AV
  5. EM 3731
  6. Instrucciones de uso

Sennheiser EM 3731 Instrucciones De Uso página 80

Ocultar thumbs Ver también para EM 3731:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 181
The operating menu
Command
AF
AF
COM
save
DEV
790.800
M
H
z
sync
03.03
BANK
AF
COM
esc
CH
32
Note:
If you select "Ext." even though no external word clock signal is
available at the BNC socket for word clock input
external word clock generator is not connected or switched off), the
display for external word clock synchronization
the last set sampling rate remains active.
Configuring the audio outputs of the EM 3732 Command twin receiver
The EM 3732 Command twin receiver has two audio outputs per receiver:
1. the audio outputs AF out 1
2. the command outputs Command 1
These audio outputs can be switched on and off via a button on the
transmitter – provided that the transmitter is also equipped with the
command function (a separate power pack with command button is
available for the SKM 5200 transmitter).
Via the "Command" menu, you can determine which of the audio and
command outputs are switched on and off when the command button on
the transmitter is pressed. There are four configuration options:
If the "Command"
menu of the receiver is
configured as shown
below ...
AF
AF
COM
AF
COM
AF
COM
COM
AF
COM
AF
COM
The active output lights up in the command display; muted outputs are not
displayed (see "Command display (status display of the audio outputs AF
and COM)" on page 11).
Change to the setting mode of the "Command" menu.
1
The current configuration starts flashing.
Select one of the four configurations by turning the jog dial
Note:
digital audio
processing
If you do not want to use the command function, select the
configuration "4".
sync
M
and AF out 2
L
and Command 2
... AND the
command button
on the transmitter
is ...
not pressed
1
pressed
not pressed
2
pressed
not pressed
3
pressed
not pressed
4
pressed
H
(e.g. because the
B
starts flashing and
K
,
J
.
... THEN the
receiver's audio
outputs are
switched ...
AF out:
on
AF
Command:
off
AF out:
on
AF
Command:
off
COM
AF out:
on
AF
Command:
off
AF out:
off
Command:
on
COM
AF out:
on
AF
Command:
on
COM
AF out:
off
Command:
on
COM
AF out:
on
AF
Command:
on
COM
AF out:
on
AF
Command:
on
COM
7
.

Publicidad

Tabla de contenido
loading

Manuales relacionados para Sennheiser EM 3731

Productos relacionados para Sennheiser EM 3731

Este manual también es adecuado para:

Em 3732Em 3732 command

Tabla de contenido