LANDMANN 800 Instrucciones De Montaje página 7

Utilisation
Functional elements (see page 3):
A. Electronic ignition
B. Burner regulator button
Starting up the barbecue:
1. Open the two side panels and insert the aroma bowl (1).
2. Open the gas supply on the gas cylinder (see operating manual)..
3. Press the regulator button and turn it anti-clockwise to the
MAX position. Press and hold down the regulator button (2).
4. Press the electronic ignition button (3).
You should hear a click.
5. Check whether the burner has been ignited.
6. If the burner has not been ignited, press the regulator
button and turn it back to the 0 position. Wait for
5 minutes to allow the gas to dissipate.
WARNING! Open the side panels during the ignition process.
WARNING! Do not bend over the cooking area when igniting the
burner.
WARNING! If the burner has not been ignited, press the regulator
button and turn it back to the 0 position. Wait for 5 minutes to allow
the gas to dissipate. Then repeat the ignition process.
Switching off the barbecue:
1. Close the gas supply (see operating manual).
2. Press the regulator button and turn it clockwise to the 0 position.
Thermometer control elements
• Igniting the burner
Igniter
Set • Temperature mode
• Timer mode
Press & Hold
• Setting the temperature
• Setting the timer
• Switching the thermometer on/off
On/Off
• Starting/stopping the timer
Press & Hold
• Toggling between °C and °F
LLL
• Temperature sensor not connected
HHH
• Temperature above 300°C / 572°F
To terminate the alarm signal, press any button (except igniter).
Note: Changes to the temperature or the timer and alarm
signals are not transferred between the device and the app.
1
2
3
Igniter
Cleaning the barbecue
Note: The infrared burner must not
come in contact with water.
Wipe the enamelled area around the burner with a damp
cloth. Do not allow any water to touch the burner.
The barbecue basket and the aroma bowl can be cleaned in the
dishwasher.
800
Set On/Off
Press & Hold Press & Hold
7