Changing Mixing Speed; Overload Switch; Cleaning, Care & Maintenance - Buffalo CD605 Manual De Instrucciones

Telephone Helpline: 0845 146 2887 (United Kingdom)
Select the desired speed and close the guard.
3.
Note: BUFFALO recommend that you start with the slowest speed and increase the
speed gradually as necessary.
Ensure the safety guard is fully closed or the mixer will not work.
Press the START button to begin mixing.
4.
Note: If the appliance is straining to mix then turn the appliance Off and remove some
of the contents of the bowl before restarting.

Changing Mixing Speed

Note: ALWAYS stop the mixer before attempting to change the mixing speed.
With the appliance turned Off:
Select the required gear using the gear change lever.
1.
Restart the appliance.
2.

Overload Switch

The Overload switch is situated at the back of the machine
beside the cable entry. If the appliance becomes too hot the
Overload switch will stop the machine automatically. If this
happens:
Turn Off the mixer.
1.
Reduce the load in the mixing bowl.
2.
Push the Overload switch back in to reset it.
3.
Allow the appliance to cool for 20 minutes.
4.
Note: In the event of a power cut the Overload switch will cut in to prevent the
appliance from restarting automatically when power is restored.
Note: Always disconnect the Planetary Mixer from the mains powers supply when not
in use.
Cleaning, Care & Maintenance
• Always turn off the mixer and disconnect from the power supply before cleaning.
• Use warm soapy water to clean the bowl and mixing attachments. Do not use abrasive cleaning
chemicals as these can leave harmful residues.
• Clean the exterior of the appliance with a damp cloth.
• Dry all parts thoroughly after cleaning.
• Do not use jet/pressure washers to clean the appliance.
• Clean the appliance regularly.
Overload
switch
UK
5