Important information | System requirements | Immediate start-up
The device must be installed in the car interior.
f
The device must be installed outside the cabin area,
f
e.g. in the cockpit or in a service compartment.
The device must be mounted to a solid, even
f
surface.
f
The installation location of the device must not be
exposed to heat, liquids or vibration.
f
The installation location of the device must provide
the required free space for plugs.
After mounting the device, the connection cables
f
must be fastened, so that no forces affect the plugs.
Please note that the maximum length of a connec-
f
tion cable with a cross-section of 0.75 mm
10 m.
For more information on the installation and connection
of the device, please refer to the chapter "Installation
drawings" at the end of this manual.
System requirements
For access to the device you need a computer with
an internet browser (Internet Explorer 6.0 or
f
higher, Firefox, Opera or Safari), and
f
WLAN 802.11 b/g/n.
Immediate start-up
1. Insert the SIM card and start the
device
f Insert the SIM card(s) with the contacts facing
upwards and the recess in the direction of the
device into the SIM card slot 4 /5.
f Switch on the vehicle ignition.
The router will start. The power supply LED 6 lights up.
Note:
If you use a second SIM card from a suitable
second network operator, you can reduce or
avoid roaming costs that can arise on interna-
tional routes. Switching between the two SIM
cards is automatic.
2. Establishing a connection to the device
via WLAN.
Note:
To establish a WLAN connection you need the
SSID (network name) and the device's WLAN
key. The SSID and WLAN keys are preset at the
Robert Bosch Car Multimedia GmbH
factory. You will find both of these numbers on
the rear of the device or on your device's ID
card.
f Use a WLAN connection application on your
computer to identify the network of the device by
referring to its SSID.
f Connect your computer to the network using the
WLAN key.
3. Open the user interface to the device
and set up mobile internet access
f Start the internet browser on your computer, and
is
2
enter this address:
http://bosch.router
The device's own web server asks you to enter the PIN
for your SIM card.
f Enter the PIN for your SIM card, and click Save
changes.
The APN (APN = Access Point Name) profile of your
cellphone provider for mobile internet access will be
selected automatically.
Notes:
f
f
f
f Click Apply.
The APN profile contains all the informa-
tion that is necessary for the mobile
internet connection via your provider.
You can also choose an APN profile from
the pull-down menu.
If the device does not know your provider
or the desired APN profile, you can change
this setting later under the Settings/
Internet menu (see the "Settings" chapter,
the section for "Settings for the mobile
internet connection", Access point (APN)
option). If necessary, ask for the correct
APN profile from your provider.
7 620 320 029 | 06.2018
en | 15