Installing The Fan; Install The Blades - HOFFLIGHTS ZANZIBAR Manual De Instalación

ZANZIBAR

INSTALLING THE FAN

Tools Required:
Phillips screwdriver, Pair of pliers, straight slot screwdriver, adjustable wrench, step ladder, and wire cutters.
INSTALLING THE MOUNTING BRACKET
The ceiling fan must be installed in a location so that the blades are 12" (300mm) spacing from the tip of the blade to the
nearest objects or walls. When hanging the fan REMEMBER to turn off the power. Follow the instruction below to hang
your fan properly:
1
For concrete ceiling, drill two
holes in the ceiling and secure the
mounting bracket to the ceiling with
two Φ0.32" (8mm)(distance between
the two holes should be appropriate)
expansion screws, flat washers,nuts
provided and tighten with a spanner.
2
For wood ceiling, Secure the
mounting bracket to the ceiling is
capable of carrying a load of at least
100lbs (45kg) with two long mounting
screws and washers provided. Be
sure at least 0.12"(30mm) of the
screw is threaded into the support.
3
Refer to the Fig. in right for mounting
when the ceiling is angled max. 15
degree angle.
NOTE: Hanger after the installation
must be able to withstand the weight
of 100lbs (45kg) or more

INSTALL THE BLADES

Place motor assembly on bottom
Styrofoam for blades installation.
Aligning the holes on bladeand
the screw holes on motor as
shown in illustration, and then
install the blade to the motor with
preassembled screws. Repeat this
process for remaining blades.
16
INSTALLATION MANUAL
15°
IMH-099 v.01 hofflights.com