Dmx Linking - Chauvet Professional COLORado 2-Quad Zoom Tour Guia De Inicio Rapido

EN
Contact
What is
Included
AC Power
Power Linking
AC Plug

DMX Linking

DMX Connection
Master/Slave
Connection
Outside the U.S., United Kingdom, Ireland, or Mexico, contact your distributor
to request support or return a product. Visit
contact information.
·
COLORado™ 2-Quad Zoom Tour
·
Neutrik® powerCON® power cord
·
Gel frame holder
(9 in/229 mm accessories)
·
Gel frame
This product has an auto-ranging power supply that can work with an input
voltage range of 100~240 VAC, 50/60 Hz.
You can link up to 7 COLORado™ 2-Quad Zoom Tour products at 120 V,
13 products at 208 V, or 14 products at 230 V. Never exceed this number.
Power linking cords can be purchased separately.
Connection
AC Live
AC Neutral
AC Ground
The COLORado™ 2-Quad Zoom Tour will work with a DMX controller using
a regular DMX serial connection. A DMX Primer is available from
www.chauvetpro.com.
The COLORado™ 2-Quad Zoom Tour uses a regular DMX data connection for
its DMX personalities: TOUR, TR16, STD.Y, ARC.1, AR1.D, ARC.2,
AR2.D, AR2.S, AR2.Z, and HSV. See the User Manual to connect and
configure for DMX operation.
Note: For optimum control of the 16-bit dimming channels in the TR16
and STD.Y personalities, be sure that both dimming curves in SET > DIM
and SET > CURV are set to OFF.
The COLORado™ 2-Quad Zoom Tour uses the DMX data connection for its
Master/Slave mode. See the User Manual to connect and configure for
Master/Slave operation.
COLORado™ 2-Quad Zoom Tour QRG
Wire (U.S.) Wire (Europe)
Black
White
Green/Yellow Green/Yellow
3
www.chauvetprofessional.com
·
Safety Cable
·
Warranty Card
·
Quick Reference Guide
Screw Color
Brown Yellow/Brass
Blue
for
Silver
Green