Ottobock MPS Instrucciones De Uso página 20

Settings and use
Using the harness
1� Press the red button to unfasten the belt�
2� Lay the shoulder straps to the side, the belt buckle to the front�
3� Sit the user into the seat�
4� Place the belts over the shoulders�
5� Lay the two strap clips over each other and insert them in the lock until you hear the clips engage�
6.12.2.3 Butterfly harness
The seat can be equipped with a butterfly harness (see Fig� 44)� It additionally stabilizes the upper body and prevents
the user from sliding out of the seat� The buckles that are used make it easy to get in and out�
Mounting the harness
1� Open the screw on the rear of the backrest (see Fig� 45)�
2� Thread the lower strap through to the rear between the seat plate and backrest; on the rear of the backrest, slide
the eyelet over the screw (see Fig� 46)�
3� Bring the shoulder straps over the backrest to the rear and slide the eyelet over the same screw�
4� Tighten with the wing nut and secure with the Phillips head screw�
20 | Ottobock
42
44
45
43
46
MPS