Fork Rebound Adjustment; Setting The Fork Spring Preload - SHERCO 450 SEF/R Manual De Propietario

450 SEF/R
Adjusting the chassis (continued)

FORK REBOUND ADJUSTMENT

1
1

SETTING THE FORK SPRING PRELOAD

94
The adjusting screws
of the fork when it rebounds. Turning the screws
clockwise increases the hydraulic force (and vice
versa).
The adjustment screws
of the upper fork legs.
Turn the screw clockwise to the stop then go
1
back the number of clicks required.
Setting rebound WP
suspension XPLOR
Ø48mm (racing)
Setting rebound
KAYABA (factory)
The adjusting nut allows the preload of the
Spring to be adjusted. Turning the nut clockwise
increases the preload (and vice versa).
Turn the nut with a wrench counterclockwise until
it stops and then turn it the number of turns
required.
Suspension spring
preload WP XPLOR
Ø48mm (racing)
determine the behavior
1
are located at the end
1
Comfort 18 clicks
Standard 15 clicks
Sport 12 clicks
Comfort 18 clicks
Standard 12 clicks
Sport 10 clicks
Comfort 0 turn
Standard 0 turn
Sport 2 turns