Assembly Instructions
1. Connect lower body (I) with four round head
bolts (B1), washers (W1) and nuts (N1). (As
shown in Fig. 1.)
2. Attach each leg (J) to the lower body (I) with
two round head bolts (B1), washers (W1)
and nuts (N1). (As shown in Fig. 2.)
3. Attach the 3 grid supports (E) to the inside
of the lower body (I) using one round head
bolt (B1), washer (W1) and nut (N1) per
support. (As shown in Fig. 2.)
4. Place charcoal bowl (K) inside lower body
(I) on top of legs.
For additional information or recipes visit www.grillpro.com!
Pour information et recettes, visiter www.grillpro.com!
¡Para más información o recetas visite www.grillpro.com!
Deluxe
De Luxe
De Lujo
5. Place water bowl (H) and cooking grid (D)
on grid supports (E) in lower body (I).
6. Attach two side handles (F) on the outside
of upper body (G) using two hex head bolts
(B2), small washers (W2) and small nuts
(N2) per handle. Tighten with screwdriver
from inside the body. Do not turn handle
to tighten.
7. Attach three insert brackets (M) on the upper
body (G) with two round head bolts (B1),
washers (W1) and nuts (N1) per bracket.
8. Place cooking grid (D) inside of upper body
(G) on grid support (E).
9. Mount dome handle (A) to dome (B) with
one round head bolt (B1) and washer (W1).
Note:
Water bowl (H) sits on top of grid supports in
lower body (I) and one cooking grid (D) sits on
top water bowl. Second cooking grid (D) sits on
grid supports in upper body (G).
Dome will fit both
grill sections
Charcoal Bowl
Lower Body (Grill 2)
Charcoal Smoker
Fumoir / Barbecue
Ahumador / Asador
Water Bowl
Upper Body (Grill 1)
1 800 GRILPRO
16"
41cm
GRILLPRO
®
WATERLOO, ONTARIO CANADA
N2V 1K3