Inflation Pedal - Hunter TCX3000 Manual De Instrucciones

(1*/,6+ ‡ ,QVWUXFWLRQV PDQXDO
TRIPLE "REVOLVER" TOOL
The revolver tool takes its name from the fact that its function can be changed by
simply turning it.
In a single unit, it provides:
- the bead breaker tool (13, Fig. G/5)
- the demounting tool (11, Fig. G/5)
- the mounting tool (12, Fig. G/5)
N.B.: The demounting tool allows tyres to be demounted with no need to use the lever
to extract the bead.
To change tools, simply lift the fixing lever and at the same time turn the revolver
(see Fig. G/6).
N.B.: This operation can be carried out with just one hand.

INFLATION PEDAL

Press the pedal (Fig. G/7) to deliver air from the inflation head.
WARNING!
Before operating the pedal, check that the head is fitted into
the wheel valve correctly.
MOBILE BEAD PRESSER
The mobile bead presser can be used in a large number of procedures in which pressure
has to be applied to the tyre.
- The handle (14, Fig. G/8) allows the bead presser to be moved vertically by hand,
to position it on the tyre.
- The control lever (15, Fig. G/8) is moved down to press on the wall of the tyre, or
raised to lift the bead presser at the end of the operation.
WARNING!
Using the bead presser on the wall of the tyre creates a
potential crushing point.
FIXED BEAD PRESSER
The fixed bead presser (see Fig. G/10) simplifies tyre demounting procedures.
The disc is raised into the working position by hand. When the set height is reached,
it locks in place automatically.
Press the button (18, Fig. G/9) to return the fixed bead presser disc to the rest
position.
13
41
12
11
G/5
G/6
G/7
15
14
G/8
7&;