Brigmton BT-341-B Manual De Instrucciones página 10

Installing Dry battery
Open the battery compartment, install 3 x AAA Alkaline batteries observing
the battery polarity diagram.
POWER SUPPLY
DYNAMO CHARGING
1. Turn off the radio
2. Turning the hand crank constantly to direct generate electricity to the
Ni-MH battery.
ADAPTOR CHARGING (excluded)
1. Turn off the radio
2. Plug one port of the matched adaptor into the AC outlet, plug the other
port into the <DC IN Jack> of the unit. The unit will charge the Ni-MH
battery automatically.
NOTE:
1. The longest charging time is 8 hours.
2. You can buy a matched adaptor from the market which is with 5 pin jack,
5V output voltage and 300mA output current or above.
USB COMPUTER CHARGING
1. Turn off the radio
2. Connecting the radio and computer via provided USB cable plus
connector
CHARGING CELLPHONE
1. Use the cellphone connector which is matched with your cellphone, to
connect the included charging cable and your cellphone.
2. Plug the other port of the supplied charging cable into the <PHONE
CHARGER Jack> of the unit.
3. Set the <Power Switch> to position.
10