Publicidad
Idiomas disponibles
Idiomas disponibles
Film speed setting
The camera is designed to use DX-coded ISO 100 to 400 films, and correct film
speed is automatically set. If non DX-coded or DX-coded ISO 200 film is loaded,
film speed is automatically set to ISO 100.
Loading film (See Fig. E — page 26.)
1. Slide the camera back lock-release lever downward to open.
2. Position the hole in the bottom of the film cartridge over the film rewind fork and
slip the film cartridge into the film chamber.
3. Pull the film leader across to the film leader position index.
4. Make sure the film lies flat between the film guides.
5. Close the camera back. Press the shutter release button repeatedly to advance
the film until the number " 1 " appears in the frame counter window.
• To confirm that film is loaded in the camera, glance at the film cartridge
confirmation window.
— 4 —
Publicidad
