TRAPP Master 500L Manual De Instrucciones página 29

✔
Press the spool against the ground as
many times as necessary.
✔
In order not to damage the equipment or
the protection device, only press the
central part of the spool against the
ground.
2 - You may want to carry out this operation
manually:
✔
Unplug the equipment.
✔
Press the central part of the spool (1) with
one hand and with the other pull the
nylon line (2) in the necessary length. If
the wire exceeds the ideal length, it will
be cut by the blade fixed to the protection
device.
2
Fixing the extension cord to the
equipment
There is a locking system in the lower part of
the handle to facilitate usage and to prevent
the extension cord from being disconnected
from the wall outlet. To use this system, do
as shown in the figure below:
✔
Put the extension cord in hole (1).
✔
Pass the cord over the lock (2).
✔
Connect the equipment plug to the
extension cord (3).
How to trim and cut the grass
✔
✔
✔
1
✔
3
1
Carefully check the area where the
equipment will be used.
Remove all stones, pieces of wood, wires,
bones, glass and other weird objects that
may cause an accident during the use of
the equipment.
For your safety, wear goggles, adequate
clothing and shoes.
1 - Hold the lawn mower/trimmer in
suspension with one hand and with
the other press the trigger. For better
performance, whenever possible, move
the lawn mower/trimmer from right to
left.
2 - Keep an adequate height in relation to
the ground.
3 - If the grass is very high, cut it in turns
to avoid overloading the equipment.
Cuts in alignment are used to trim the
grass that grows over sidewalks and
driveways. Tilt the lawn mower/trimmer
and cut above the paved area.
2
27