Maintenance - Ryobi P3340 Manual Del Operador

USING THE POWER CORD
See Figure 3, page 9.
NOTE: Use the included power cord only with the RYOBI
P3340 Fan.
 Place the speed switch in the OFF ( 0 ) position.
 Insert the female end of the power cord into the product
as shown.
 Connect the male end of the power cord to the power
source.
 Make sure the power cord is secured before beginning
operation.
STARTING/STOPPING THE PORTABLE FAN
See Figure 4, page 9.
 Connect the fan to an AC or DC power supply.
 To start the fan, turn the speed switch clockwise and
select the desired speed.
 The speed switch has four settings:
0 - Off
3 - High
2 - Medium
1 - Low
 To stop the fan, turn the speed switch counterclockwise
to the OFF ( 0 ) position.
WARNING:
When servicing, use only identical replacement parts.
Use of any other part could create a hazard or cause
product damage.
NOTE: ILLUSTRATIONS START ON PAGE 8
AFTER FRENCH AND SPANISH LANGUAGE SECTIONS.
OPERATION
HANGING THE PORTABLE FAN WITH THE
KEYHOLE MOUNT
™ See Figure 5, page 9.
NOTE: Be careful not to hang the fan in such a way that it
prevents normal fan operation or damages the cord.
 Use a #9 x 2 in. minimum screw size for mounting the
fan.
 Ensure that the screw is securely fastened into a stud
and that the screw is exposed no more than 5/8 in.
 Slide the keyhole hanger, located on the frame cross
member, over the screw. Make sure the fan is securely
mounted.
ADJUSTABLE HEAD
See Figure 5, page 9.
To change the angle of the fan head, loosen the adjustment
knob on each side of the fan head. Select the desired
position and tighten each knob to secure.
NOTICE:
Adjusting the fan head without loosening the adjustment
knobs could result in damage to the fan.

MAINTENANCE

GENERAL MAINTENANCE
Avoid using solvents when cleaning plastic parts. Most
plastics are susceptible to damage from various types of
commercial solvents and can be damaged by their use. Use
clean cloths to remove dirt, dust, oil, grease, etc.
7 – English