NUK Baby Thermometer 2 in 1 Manual De Instrucciones página 39

Surface
temperature
Previous
measurement
With the device switched on, press and hold the
ON/MEM button while, at the same time, briefly pressing
the SCAN button several times in succession. The
measurement setting will switch between ear, temple and
surface temperature. Either
the LCD display. In the
of objects can be determined. To take a measurement,
hold the thermometer as near as possible to the object in
question. The further away you are, the larger the
measured area and the greater possibility of
inaccuracies.
Briefly press the SCAN button to carry out a
measurement.
Press and hold the SCAN button to constantly update the
temperature value.
This mode is suitable for measuring the temperature of
water, milk, clothing, skin or other objects.
This mode only shows the surface temperature
(temperature emitted by the surface).
This measurement does not indicate body
temperature and cannot be used for diagnosing
16
fever.
This function is valid in ear and temple measurement
mode. For every new temperature measurement, the
result from the previous measurement will be shown for
comparison at the top of the LCD display.
- 39 -
or will appear on
mode, the surface temperature