Stanley Fat Max S2 Manual De Instrucciones página 4

Vertical Applications
To attach to vertical surface, apply a small por-
tion of adhesive putty to push pads (Fig.3). Align
instrument using horizontal leveling vials. Firmly
press push buttons to attach unit to surface.
(Fig.4).
Fig. 3
Fig. 4
CALIBRATION
This instrument is factory calibrated and should
never need field calibration. Calibration should be
performed only by an authorized service center.
Contact CST/berger, a division of Stanley
Works™ Customer Service at US (815)432-5237.
SAFETY AND CERTIFICATION
Working safely with this instrument is possible
only when the operating and safety information is
read completely and the instructions contained
therein are strictly followed. Do not remove the
label on the side of the housing.
4 • S2/S2XL