Resetting The Appliance; Lengthy Downtimes Of Appliance - Angelo Po 1G1FA0E Manual De Uso

2 - Turn the knob (B) to setting 1, between the min-
imum and maximum temperature, and wait for
the warm-up time before using the oven.
The lights (C) and (D) is on, the light (C) goes
out once the temperature is reached.
3 - Turn the knob (B) to setting to turn on the top
heating element.

RESETTING THE APPLIANCE

If the safety thermostat is
tripped, the appliance has to
be restored to the initial
working conditions as fol-
lows.
1 - Pull off the knob (A).
2 - Undo the screws (C)
and remove the control
panel (B).
3 - Press the button (D) of
the safety thermostat to
restore the electricity
supply.
4 - Replace the control panel (B) and the knobs (A)
on completion of the operation.

LENGTHY DOWNTIMES OF APPLIANCE

If the appliance is to be out of use for a lengthy pe-
riod, proceed as follows.
1 - Turn off the gas supply tap.
2 - Cut off the mains electricity supply using the ap-
pliance's master switch.
3 - Clean the appliance and the surrounding areas
thoroughly.
Turning off
4 - Turn the knob (B) to setting 3, to switch off the
heating elements.
The mains (D) and temperature (C) lights go
out.
5 - Turn off the appliance's circuit breaker to dis-
connect it from the electrical mains.
A
4 - Spread a film of edible oil over the stainless
steel surfaces.
5 - Carry out all the servicing procedures.
6 - Leave the appliance uncovered and the cook-
ing chambers open.
- 11 -
C
B
D
IT
GB
DE
IDM-39616600800.tif
FR
ES
English