Operating Elements And Connections; Safety Notes - Monacor security TVCCD-400COL Manual De Instrucciones

Please unfold page 3. Then you can always see the
operating elements and connections described.

1 Operating Elements and Connections

1 BNC jack for the video output, 1 Vpp at 75 Ω
2 Selector switch AUTO IRIS for adjusting the cam-
era to the lens type used,
see table on page 3
3 Control LEVEL for adjusting the operating point
when using a DC lens
4 Power supply connection for 12 V
centre contact = positive pole
5 Jack for connecting a lens with automatic iris con-
trol (auto iris lens),
for pin configuration see table on page 3
6 DIP switches for selecting, activating and deactiva-
ting various functions
1 GAMMA 1/2 gamma correction 0.45 or 1
2 AGC automatic gain control
3 SHUTTER electronic shutter
4 BLC backlight compensation
5 FLICKERLESS flicker compensation
7 Adapter with 6.3 mm (
for ceiling suspension, screw the adapter onto the
upper side of the camera
8 Setscrews for adjusting the mechanical focus set-
ting for the lens
9 Adapter ring for mounting a lens with C-mount
thread
10 Lens cover

2 Safety Notes

,
The camera corresponds to the directive for electro-
magnetic compatibility 89/336/EEC.
The camera is suitable for indoor use only. For out-
side installation, the camera must be mounted into a
weatherproof outdoor housing.
Protect the camera against impurities, humidity, and
heat (admissible ambient temperature range
0 – 40 °C).
For cleaning only use a dry, soft cloth; never use
chemicals or water.
No liability for any damage will be accepted if the
camera is used for other purposes than originally in-
1
/ ") thread;
4
GB
9