Initial Use - Beurer BF 1000 Instrucciones De Uso

6. Initial use

Positioning the scale
Place the scale on a flat and stable surface. A solid surface is a prerequisite for a precise
measurement.
1. Open the cardboard box.
2. Remove the polystyrene cover on the left
and right.
3. Lift up the upper and lower part of the
aluminium stand at the same time.
4. Insert the upper part of the aluminium stand
into the lower part and secure with screws
at the top.
5. Position the aluminium stand upright in the card-
board box. Slide the scale to the edge...
6. ...and secure with screws at the bottom.
7. Hold the stand in place with one hand and remove
the film with the other.
8. Insert batteries the correct way round in the under-
side of the scale (+/-). Stand the scale upright on a
flat surface.
22