NOCO Genius BOOST PRO GB150 Guia Del Usuario página 11

User Interface.
1. Internal Battery Level
Indicates the charge level of the internal battery.
2. Error LED
Illuminates Red if reverse polarity is detected, or blinks "On"
and "Off" when the internal battery temperature is too high.
3. Power Button
Push to turn unit "On" & "Off".
4. Power LED
Illunimates White when unit is "On".
5. Boost LED
Illuminates White when Boost is active. If the unit is connected
properly to a battery, the GB150 will automatically detect a
battery and go into Boost mode (LED flashes White when
Manual Overide feature is active).
6. Manual Override Button
To enable, push and hold for three (3) seconds.
WARNING: Disables safety protection and manually
forces Boost "On". Only for use when a battery is too
low to be detected.
7. Light Mode Button
Toggles the ultra-bright LED light through 7 light modes:
100% > 50% > 10% > SOS > Blink > Strobe > Off
8. Voltmeter Display
Displays the voltage of the vehicle's battery for enhanced
diagnostics and troubleshooting when the battery clamps are
connected.