Pontec PondoClear Set Instrucciones De Uso página 12

- GB -
- GB -
Translation of the original Operating Instructions
Information about these operating instructions
You made a good choice with the purchase of this product PondoClear Set 4000.
Prior to commissioning the unit, please read the instructions of use carefully and fully familiarise yourself with the unit.
Ensure that all work on and with this unit is only carried out in accordance with these instructions.
Adhere to the safety information for the correct and safe use of the unit.
Keep these instructions in a safe place! Please also hand over the instructions when passing the unit on to a new
owner.
Symbols used in these instructions
The symbols used in this operating manual have the following meanings:
Risk of injury to persons due to dangerous electrical voltage
This symbol indicates an imminent danger, which can lead to death or severe injuries if the appropriate meas-
ures are not taken.
Risk of personal injury caused by a general source of danger
This symbol indicates an imminent danger, which can lead to death or severe injuries if the appropriate meas-
ures are not taken.
Important information for trouble-free operation.
A Reference to one or more figures. In this example: Reference to Fig. A.
→
Reference to another section.
Product Description
Delivery scope and unit configuration
When delivered, all components to be assembled are in the filter container and have to be removed first!
• To open the container → Installation.
A PondoClear Set 4000
Submersion unit
1 Housing cover
2 Housing
3 Hose connector (1 × with O ring) and union nut
− For the connection of a 20 mm hose ∅ (6)
4 UVC clarifying unit
−
A UVC lamp radiates and kills algae in the water
5 Pond pump
−
First pumps the pond water into the UVC clarifying unit (4), then into the container (8)
6 20 mm hose ∅
−
Connects the UVC clarifying unit (4) to the container (8)
Filter
7 Container cover
8 Container
−
The delivery includes also the submersion unit, the hose (6) and a kit containing hose connectors (3), the infill
bend (13) and O rings
−
Filter elements include foam filters (9/10) and bio balls (12)
− Coarse foam filter to mechanically clean and nitrify the water
9
10 Fine foam filter to mechanically clean and denitrify the water
11 Outlet matching the DN 50 HT tube or a 2" ∅ hose
12 Once colonised by bacteria, bio balls act as a filter element for biologically cleaning the water
13 Inlet bend
12
Quantity
1 x
1 x
2 x
1 x
1 x
1 x
1 x
1 x
1 x
1 x
1 x
15 x
1 x