Remote Control Parts And Functions - Teac AX-505 Manual Del Usuario

a
b
c
d
The RC-1332 remote control supplied with the AX-505 can con-
trol both AX-505 and PD-501HR units.
Only the buttons used for the AX-505 are explained in this
document.
When the main unit and the remote control both have buttons
with the same functions, this manual explains how to use one of
the buttons. The other corresponding button can be used in the
same manner.

Remote control parts and functions

a
STANDBY/ON button
Press to put the unit into standby mode or turn it on.
e
b
Input selection buttons
Use to select the playback source.
c
METER button
Press to change level meter operation.
d
MUTE button
Press this button to mute the sound temporarily. Press it again
to restore sound output at the previous level (page 13).
Press and hold to cancel muting (page 13).
e
f DIMMER button
Use to change the brightness of the input source indicators
and level meters.
Press to cycle through the brightness settings in the following
order.
Bright indicators, bright meters
Medium indicators, medium meters
Dim indicators, dim meters
Dim indicators, unlit meters
f
VOLUME (+/−) buttons
Use to adjust the volume.
Press and hold a VOLUME button to continuously change the
volume.
c
c
c
EN
11