To Stop The Product; Maintenance; Maintenance Schedule - Husqvarna 220iL Manual Del Usuario

To stop the product

1. Release the power trigger or the power trigger
lockout.
2. Push the power button until the green LED is off.
Introduction
WARNING: Read and understand the safety
chapter before you do maintenance on the
product.

Maintenance schedule

WARNING: Remove the battery before you
do maintenance.

Maintenance

Clean the external parts of the product with a dry cloth. Do not use water.
Examine that the power button works correctly and is not damaged.
Make sure that the power trigger and the power trigger lockout function correctly
from a safety point of view.
Make sure that all controls work and are not damaged.
Keep the handles dry, clean and free from oil and grease.
Make sure that the cutting attachment is not damaged. Replace the cutting at-
tachment if it is damaged.
Make sure that the cutting attachment guard is not damaged. Replace the cut-
ting attachment guard if it is damaged.
Make sure that the screws and nuts are tight.
Make sure that the battery release buttons on the battery works and locks the
battery in the product.
Examine that the battery charger is not damaged and function correctly.
Make sure that the battery is not damaged.
Make sure that the battery is charged.
Make sure that the battery charger is not damaged.
Examine all couplings and connections. Make sure they are not damaged and
free from dirt.
1511 - 002 - 22.07.2020
3. Push the release buttons on the battery and pull the
battery out.
Maintenance
The following is a list of the maintenance steps that you
must do on the product. See
more information.
Introduction on page 15 for
Daily Weekly Monthly
X
X
X
X
X
X
X
X
X
X
X
X
X
X
15