BOJ HB-400 Manual De Uso página 4

English
assembling, disassembling or cleaning.
25. If the unit has fallen into the water, first pull the mains plug and then take it out! Do not operate
the unit afterwards, but only have it checked by an authorized service center.
26. For a blending process, do not fill the measuring beaker more than up to the 500 ml mark.
27. The appliance is equipped with a speed controller (A), where you can adjust the desired speed
(1-5) of the respective accessory according to your wishes. Speed II is suitable for process the
hard food such as carrots, apples and pears. Speed 1-5 is suit for process soft food such as
banana, strawberry and milkshake.
28. The care shall be taken when handling the sharp cutting blades, emptying the bowl and during
cleaning.
29. Speed"I"can be adjusted, level "1" is lower speed and level "5" is a higher speed. On the other
hand, speed "II" is a quicker speed (Turbo) which cannot be adjusted.
Intended use:
The appliance is intended solely for stirring and mixing foodstuffs. In addition, the unit is not
intended for commercial use. Any other use or modification of the device is not intended and is
generally prohibited. We can't be held responsible for damage caused by misuse or misuse.
Description
A. Speed controller (1-5)
B. Switch I (On button)
C. Switch II (Turbo button)
D. Motor unit
E. Stainless steel blender stick
F. Blender stick shield
Before first use:
1. Carefully remove the device and accessories from its sales packaging.
2. Remove all packing parts.
3. Clean the appliance and all accessories.
How to use the hand blender
The hand blender is perfectly suited for preparing dips, sauces, soups, mayonnaise and baby food
as well as for mixing and milkshakes.
3. Press "Switch I" to operate the appliance, and then set the speed (1-5) you need. Or press
"Switch II" to operate it.
4. Remove the blender stick off the motor unit after use. You can use the hand blender in the
measuring beaker and just as well in any other vessel.
5. For blender attachments, use only less than 1 minute. It must fully cool down the unit before
next use.
1. Place the blender stick (E) on the motor unit (D). Plug the
two parts together until they are locked with an audible
click.
2. Always hold the blender stick (E) vertically into the vessel
and add the ingredients you want to process.
- 4 -