Hoover LA71_LA30011 Manual De Instrucciones página 4

GETTING TO KNOW YOUR CLEANER
A. Suction Regulator
B. Hose Handle
C. Telescopic Tube Adjuster
D. Telescopic Tube
E. Floor Type Selector Pedal
F. Carpet & Floor Nozzle (Gp)**
F1. Carpet Nozzle (CA)**
F2. Hard Floor Nozzle (HF)**
G. Hose
H. Dust Bin Flap Release Button
I. Dust Container Lid Release Button
J. On/Off Pedal
K. Dust Container Release Button
L. Cord Reel Pedal
M. Park Slot
N. Dust Container Lid
O. Pre-Motor Filter
P. Vortex Finder
Q. Cyclone Body
R. Dust container
S. Dust container Flap
T. Exhaust Filter
U. Exhaust Filter Cover
V. 2 In 1 Accessory
W. Pet Hair Remover Mini Turbo Nozzle*
X. Allergen Remover Mini Turbo Nozzle*
Y. Parquet Nozzle*
ASSEMBLING YOUR CLEANER
Remove all components from the packaging.
1. Connect the hose to the cleaner main body, ensuring it clips and locks into position.[1]
2. To release: simply press the two release buttons on the hose end and pull. [1]
Connect the hose handle to the upper extension tube end, or accessories if required. [2]
3.
4. Connect the extension tube lower end to the carpet and floor nozzle*, or accessories if
required. [3]
*Certain Models Only ** Certain models only, nozzles may vary according to model
USING YOUR CLEANER
1. Extract power cord and plug it into the power supply. Do not pull the cord beyond the
red marker. [4]
2. Adjust the telescopic tube to the desired height by moving the telescopic tube adjuster up
and raise or lower the handle to the most comfortable cleaning position. [5]
3. Carpet & Floor Nozzle**. Press the floor type selector on the nozzle to select the ideal
cleaning mode for the floor type. [6]
Hard Floor – Brushes are lowered to protect the floor.
Carpet – Brushes are raised for the deepest clean.
4. Switch the cleaner on by pressing the on/off pedal on the cleaner main body. [7]
5. Adjust the suction regulator on the handle to the desired level. [8]
6. Switch off at the end of use by pressing the on/off pedal. Unplug and press the cord
reel pedal to wind the power cord back into the cleaner. [9]
PARKING AND STORAGE SECTION
The tube and nozzle can be parked on the back of the cleaner for storage or temporary
storage while in use. [8]
ACCESSORIES
To obtain the best performance and efficiency it is recommended that the correct nozzles
are used for the main cleaning operations. These nozzles are indicated in the diagrams
by the letters GP, HF or CA.
A nozzle type GP can be used to clean both carpet and hard floor.
A nozzle type HF is suitable for use only on hard floor.
A nozzle type CA is suitable for use only on carpet.
The other nozzles are accessories for specialist cleaning tasks and are recommended
for occasional use only.
2
GB