p6 GoTo User Manual
SECTION 05: Cleaning and Care Information
Plastic Seat Base
1. When cleaning the plastic seat base
we recommend that you use only
warm water and a non-abrasive
2. Disinfectant alcohols such as ethanol
and isopropanol are suitable for use
on the plastic body.
3. Never use organic solvents
1. Clean and care for your fabric on a
regular basis. Simply vacuum with
an upholstery attachment to remove
dust particles and wipe with a damp
cloth for general cleaning.
effective without soap which is
helpful, as soap can clog your fabric.
3. The seat covers can be removed
from the hard plastic seat base
and machine washed at 40°C.
Do not tumble dry.
5. Upholstery can be placed into the
washing machine intact, after
removing straps, buckles and
fastenings. Store these in a safe
place and out of reach of children.
6. Fabric can also be cleaned by hand
whilst in place. For solid food spills,
scoop up with a spatula. Clean the
fabric with a water-based product
such as foam from a mild detergent
and remove with absorbent cloth,
towels or sponge.
7. To successfully clean upholstery
without over-wetting the fabric or
causing colours to bleed, products
care for upholstery must be used.
8. Clean spills right away. The longer a
spot or spill goes untreated, the more
lead to permanent colour loss.
9. Routine soap and warm water
sponging is effective for ordinary
soiling and minor spills. Avoid rubbing
as it can be abrasive and damage
the fabric. Be careful not to saturate
the fabric as this will cause the stain
to spread. Work your way from the
outside in to avoid spreading the
stain more.
10. Antiseptic cleaning agents can
be used on more stubborn stains.
as Isopropyl Alcohol or ethanol are
suitable for use on GoTo. Ensure that
cleaning products are fully removed.
Please allow the product to air dry,
ensuring all alcohol is evaporated
before use.