AEG SR 4842 BTS Instrucciones De Servicio página 33

NOTE:
• Depending on the device manufacturer, you need to
perform the registration (PAIRING) again to connect
the devices.
• In case of problems with the registration of a replay
device, deactivate the WiFi- / and mobile data function
in your playback device.
• The Bluetooth compatibility cannot be ensured for devic-
es (e. g. mobile phones) getting released in the future.
• To ensure an optimal connection, make sure that the
battery of your player is completely charged.
• Some of the mobile phone brands have an energy-sav-
ing mode. Deactivate the energy-saving mode as it can
otherwise result in problems during the data transfer
through Bluetooth.
• To be able to transfer audio data, Bluetooth needs to
stay activated in your player. Observe the operation
manual of your player.
• If a mobile phone on which you are playing music re-
ceives a call, the music will be interrupted. Press the /
button to receive the call. The sound will be played
back through the radio. Speak towards the microphone
or transfer the call to your mobile phone. When doing
this, please refer to the fade-in on the display of your
mobile phone. After you have terminated the phone
call, the playback will resume.
• When the devices get disconnected, the speaker will
announce "SPEAKERS DISCONNECTED". "
flashes in the display.
Description of the Control Buttons
NOTE:
• Not all the functions may be supported depending on
the playback device.
• Depending on the device, you must start the music app
on your playback device beforehand.
/ (4)
• Bluetooth music
You can briefly interrupt and resume playback using this
button. Pressing again continues playback.
• Speakerphone operation
- Press the button to answer or finish an incoming call.
- Press and hold this button to reject an incoming call.
(3)
Press once = Starts the current title again from the
beginning.
Press twice = Jumps to the preceding title.
Press three times = Plays a preceding title, etc.
SR4842BTS_IM
(5)
You can use this button to jump to the next or overnext title
etc.
Cleaning
CAUTION:
Do not immerse the device in water.
• Disconnect the mains plug before cleaning.
• You may wipe off external stains, using a slightly damp
cloth without any additives.
Troubleshooting
Problem Cause
The unit The unit is
cannot be blocked and
operated. "hangs".
No sound. Volume is too
low.
Poor sound Radio signal too
quality. weak.
No audio The device is not
signal during registered with
bluetooth the audio source.
connection.
"
Volume too low.
Device can Registration does
not be con- not work.
nected.
Audio source is
shut off.
Bluetooth is shut
off on the audio
source.
Bluetooth version
is not supported.
English
33
Solution
Disconnect the power
supply for 5 seconds.
Then switch the
device on again.
Increase the volume.
Try to adjust the
antenna position.
Ensure that there is a
connection. Register
the device with the
audio source again, if
necessary.
Increase the volume
on the device.
Increase the volume
on the audio source.
Check to see if the
audio source supports
the A2DP protocol.
Turn on the audio
source.
Turn on the Bluetooth
function on the audio
source.
Use a different play-
back device.
23.09.16