Handpiece Holder; Care And Maintenance - NSK Varios 370 Operación Manual

9
Holder

9-1 Handpiece Holder

While the Handpiece is not in use, put the Handpiece on the
Handpiece Holder. (Fig.17)
NOTICE • To prevent injury, always mount Scaler Tip Cover S.
9-2 Tip Holder(Option)
For a Tip removed from the handpiece, use the Tip
Holder.
The Tip Holder is Autoclavable and holds up to
5 tips at once. To Autoclave, tilt the tips in the
direction of the arrow in Fig.18.
10

Care and Maintenance

10-1 Cleaning of Optic Fiber (Varios2 Lux)
Wipe the debris off the end of the Optic Fibers at the
handpiece with alcohol soaked cotton swab. (Fig.19)
• Do not use any sharp pointed tools to
clean the Optic Fiber End Face. In case of
CAUTION
the light degridation, contact dealer.
10-2 Changing O-Ring
Handpiece Cord
An O-Ring is located in the Handpiece Cord Connector. Use a pointed tool
to remove, and mount new O-Ring into the groove. (Fig. 20)
Optional O-Ring: Order Code D0310020080
Tip
Optic Fiber End Face
12
Handpiece
Holder
Fig.17
Tip Holder
Fig.18
Fig.19
O-Ring
Fig.20