Chapter 9 Instruction Of Recording Paper - Gima ECG90A Manual De Uso

51
• The device adopts high-speed thermal recording paper with the
specification of 50mm(W)×20m(L).
• Open the cover of paper carriage, take out the paper roll and install it
into recording paper then load them at the proper position inside
the carriage.
• Close the cover of paper carriage. It's recommended to leave 2cm
paper outside.
Chapter 9
INSTRUCTION OF RECORDING PAPER
9.1 When recording, the device will stop paper trace in case of paper lack,
and the LCD screen will display as the figure below to prompt paper
lack.
9.2 It is recommended to use the thermal recording paper specified by our
company to ensure ECG waveforms of good effect. Bad recording paper
will result in unclear ECG waveforms, fading or unsmooth paper trace,
etc, even pricking up the device's worn up and shortening the service
cycle of such important components as printer head. Please consult
your manufacture or our company for purchasing this recording paper.
9.3 High temperature, humidity or direct sunniness may all be the causes for
recording paper failure. The paper, which will not be used for long, shall
be stored in a cool, dry and dark place.
9.4 Substance may contaminate surface of the recording paper:
Gel, glue, and half-dry diazo compound copy paper, etc, including their
organic solvent.
9.5 Substance may cause the waveforms to disappear:
Soft PVC folders, plastic, etc; demagnetization machine and tape
containing plasticizer;
Some fluorescence ink pen and stamp-pad ink,etc.
ENGLISH
6