Publicidad
9
To allow the doors to self-
●
close, tilt the top backwards
by about 10mm.
Reversing the door
The side at which the door
opens can be changed,
from the right side (as
supplied) to the left side, if
required.
Warning! When reversing
the door, the appliance
must not be connected to
the mains. Ensure that the
plug is removed from the
mains socket.
Tools you will need
8mm socket wrench
Cross-shaped screwdriver
Thin-blade screwdriver
Monkey wrench
left door stopper
≤10mm
8mm wrench
Left Hinge Cover
Note: If required you may
lay the refrigerator on its
back in order to gain
access to the base, you
should rest it on soft
foam packaging or similar
material to avoid damaging
the backboard of the
refrigerator. To reverse the
door, the following steps
are generally
recommended.
1. Stand the refrigerator
upright. Open the upper
door to take out all door
racks(to avoid damage)
and then close the door.
Caution! Please slightly
squeeze the door rack from
two sides toward
inside of
door rack,and then
move it upward when taking
out.
centre and
Publicidad
