Features; Assembly; Operation - RIDGID R87044 Manual Del Operador

FEATURES

PRODUCT SPECIFICATIONS
Hose Length ................................................................20 in.
Maximum Pressure ..................................................150 PSI

ASSEMBLY

WARNING:
Do not use this product if it is not completely
assembled or if any parts appear to be missing or
damaged. Use of a product that is not properly and
completely assembled or with damaged or missing
parts could result in serious personal injury.
If any parts are damaged or missing, please call 1-866-539-1710 for assistance.

OPERATION

WARNING:
Do not allow familiarity with this product to make
you careless. Remember that a careless fraction
of a second is sufficient to inflict serious injury.
WARNING:
Always wear eye protection with side shields
marked to comply with ANSI Z87.1. Failure to do
so could result in objects being thrown into your
eyes resulting in possible serious injury.
WARNING:
Do not use any attachments or accessories
not recommended by the manufacturer of this
tool. The use of attachments or accessories not
recommended can result in serious personal injury.
WARNING:
Do not leave items to be inflated unattended while
inflator is in use. These items can burst and could
cause serious injury.
NOTICE:
The inflator is not designed for continuous use. For
every five minutes of inflator use, five minutes of
cool down time are required. Routinely exceeding
the duty cycle can reduce the life of the tool.
Duty Cycle ............................... 5 minutes On/5 minutes Off
Gauge ................................................. Digital Readout (PSI)
WARNING:
Do not attempt to modify this product or create
accessories or attachments not recommended
for use with this product. Any such alteration
or modification is misuse and could result in a
hazardous condition leading to possible serious
personal injury.
NOTICE:
The inflator is capable of inflating to 150 PSI. To
avoid over inflation, carefully follow instructions
on items to be inflated. To avoid product damage,
never exceed recommended pressures.
APPLICATIONS
You may use this inflator for the purpose listed below:
 Inflating items such as motorcycle, car, and bicycle tires
 Inflating small inflatables and sports balls
NOTE: The inflator is not designed for commercial
applications.
WARNING:
Battery tools are always in operating condition.
Always remove battery pack from your tool when
you are assembling parts, making adjustments,
cleaning, or when not in use. Removing battery
pack will prevent accidental starting that could
cause serious personal injury.
TO INSTALL/REMOVE BATTERY PACK
See Figure 1, page 10.
 If installed, remove the 12 V adaptor.
 Insert the battery pack into the product as shown.
 Make sure the latches on each side of the battery pack
snap into place and that battery pack is secured in the
product before beginning operation.
 Depress the latches to remove the battery pack.
For complete charging instructions, see the operator's
manuals for your battery pack and charger.
6 - English