Warning Indicators - Saivod STE84C Manual Del Usuario

Selecting a Programme and Operating Your Machine
5.6 Auxiliary function
Audio Warning
Cancel Audio warning
audio warning level 1
Your dryer will give an audio warning when the
programme comes to an end. If you do not want to
hear this buzzing or want to change the volume level,
you need to press the "Volume level" button. No audio
warning will be given when "x" appears on the screen.
C
You can select this function either before or
after the programme starts.
5.7 Drying degree
Used to adjust the required dryness level. More drying
is performed compared to the default settings when "+"
sign appears and less drying is performed when "-" sign
appears. Programme duration can change depending on
the selection.
A
This function must be selected before the
programme starts.
5.8 Anti-creasing
A 2-hour anti creasing programme to prevent laundry
from creasing will be activated if you do not take
the laundry out after the programme is over. This
programme rotates the laundry in 600-second intervals
to prevent creasing. Press "Anti-creasing" button to
activate.
Anti-creasing is activated but the programme is running
in the first exemplary figure. Drying is over and the first
step of anti-creasing has started in the second figure.
Dryer / User Manual
Audio warning Audio warning
level 2 level 3
5.9 Changing the contrast
Contrast can be adjusted in order to make the symbols
on the display appear clearer. It may particularly be
necessary to change the contrast setting of the display
when the dryer is installed over a washing machine.
press and
Press and hold the Spin Speed/Time button for 3
seconds.
When the contrast is changed at the end of 3 seconds,
all symbols on the display will become visible for
3 seconds in order to indicate that the process is
complete.
Perform the same procedure to revert back to the
previous contrast setting.

5.10 Warning indicators

C
Warning indicators may differ according to the
model of your machine.
Filter cleaning
A warning symbol will appear to remind filter cleaning
after the programme finishes.
C
If the filter cleaning symbol flashes continuously,
please refer to "Suggested solutions for
problems".
Water tank
A warning symbol will turn on at the end of the
programme or when the tank is full with water. The
machine stops operating if the warning symbol turns on
when a programme is running. To restart the machine,
please drain the water in the water tank. Press "Start/
Pause/Cancel" button to start the programme after you
have emptied the water tank. The warning symbol turns
off and the programme resumes operating.
19 / 80 EN