Multiplex SMART SX FLEXX Manual De Instrucciones página 74

Tamiya model tanks
SMART SX FLEXX
Please adhere strictly to the operating sequence given in the following description:
1 Move trimming for steering to centre position:
Move the right horizontal rocker switch to
centre position by briefly pressing the
rocker switch.
An acoustic signal indicates that centre
position has been assumed.
2 Move the left vertical rocker switch to
centre position.
An acoustic signal indicates that centre
position has been assumed.
3 Start programming mode on the multi-function unit (e.g. Tamiya MF-07).
Teaching the actuator:
5
Hold the actuators in the end positions for 2 seconds each.
(a) Left stick: forwards
(b) Left stick: backwards
Page 73