audiophony GOA4D Manual De Instrucciones página 9

8. Listen to the signal with your headphones
Press the CUE button (7) on channel 1. Adjust the LEVEL controller (29) to obtain a comfortable monitoring
volume. Now you should hear music with your headphones. Turn the SPLIT controller (28) to the right to crossfade
the CUE signal and the MASTER signal. When this controller is completely turned to the right, only the MASTER
signal will be monitored.
9. Try the operation of the tone controllers
Experiment with this powerful 3-way stereo equaliser (4, 5, 6). This tone control has been designed for a creative
sound edition: each way can be individually isolated using the big and ergonomic rotary controllers.
10. Verify the crossfader settings
Each channel can be assigned to the crossfader using the
A/OFF/B switch (10). The crossfader allows melting the signals
assigned to its sides. If the switch is in position A or B, the channel
is assigned to one or the other side of the crossfader. The OFF
position disables the crossfader function for this channel.
11. Adjust the crossfader curve
The SHAPE control (19) allows you to precisely adjust the skew
angle of the crossfader's curve. Turning the controller completely
to the left, the two songs will be melt softly. The crossfader's curve
raises when turning the controller to the right. Moving the controller
completely to the right, the signal will enter suddenly with just a
short movement of the crossfader, which is a very suitable feature
for scratching techniques.
9