Cleaning And Maintenance - Mx Onda MX-PB2442 Manual De Instrucciones

INDICATIONS OR WARNINGS ON DISPLAY
Operating error message
When the display shows the digits "- - - -" it will indicate a malfunction and
should be checked by the technical staff. Contact your nearest MX ONDA
Technical Service Center or distributor.
Overweight indication
When you exceed the weight limit of the scale 150 Kg / 330 lb., the display will
show the indication of overload " EEEE ", to avoid damage to the scale, get off
immediately.
Indication low batteries
When the display shows " Lo " when the scale is turned on, it indicates that the
batteries are exhausted and need to be replaced.
Indication out of range percentage
When the display shows this " Err " indication, the percentage of body fat
content is above or below the limits of the measurement scale.

CLEANING AND MAINTENANCE

If you do not intend to use the appliance for a long period of time, remove
the batteries and store them in a cool place.
Do not try to disassemble the batteries, do not short them and never heat
them or throw them into the fire.
Batteries contain pollutants from the environment, so, once the life of them
is exhausted, DO NOT throw them away, put them in the right place for
later recycling.
Clean the scale with a soft cloth moistened with water or a mild detergent.
DO NOT use abrasive chemicals to clean it.
Avoid exposing the device to extreme temperature and humidity, direct
sunlight, water or dust.
9