Troubleshooting
Fault
The display shows an
error message (e.g.
"Err1") and the
appliance does not
cool.
8.1
The lid has been forced past the built-in stop
b
➤ Support the lid with one hand (A).
➤ Hold the latch down with the other hand (B).
!
CAUTION!
HEALTH HAZARD!
Failure to obey this caution could result in minor or moderate injury.
Beware pinching your thumb while closing the lid.
A
NOTICE!
DAMAGE HAZARD!
Failure to observe this instruction can cause the lid to break off.
➤ Close the lid as far as possible without pinching your thumb, while still holding
the latch down, to keep it from breaking.
✓ The lid should now be approximately at angle (fig. b, page 24).
24
Possible cause
The appliance has
switched off due to an
internal fault.
Suggested remedy
This can only be repaired by an
authorised repair centre.
B
CFF35, CFF45
A
EN