Technical Data; Equipment / Accessories; Start-Up; Changing The Threaded Mandrel (Fig. 3) - Gesipa FireBird Pro Manual De Instrucciones

2.4

Technical data

Weight:
Max. setting stroke:
Drive unit:
Traction power:
Noise emission:
Vibrations:
2.5

Equipment / accessories

Nosepieces / threaded mandrels
for FB Pro
for FB Pro GE:
Tool:
Suspension loop:
Battery charger:
Battery (quick-change):
3.

Start-up

Prior to operating the riveting tool, you must choose the correct nosepiece and threaded man-
drel that are suitable for the nut dimensions.
3.1

Changing the threaded mandrel (Fig. 3)

• Remove the battery from the tool
• Loosen lock nut 3 using double open-ended spanners (WAF 24/27)
• Unscrew nosepiece 2.
• Push back slide 10 as far as it will go.
• Unscrew threaded mandrel 1
• Screw in the suitable threaded mandrel. Align the surfaces of the hexagon on the
screwed-in threaded mandrel 1 with the surfaces of the hexagon of slide 10.
• Secure nosepiece 2 which is suitable for the thread dimensions with lock nut 3.
2.2 kg
10 mm
Brushless direct current motor
15 kN for FB Pro
20 kN for FB Pro GE
L 76,5 dB (A), Measurement uncertainty K = 3 dB
pa
< 2,5 m/s², Measurement uncertainty K = 1,5 m/s²
M6 in working position
M4, M5 in the nosepiece holder
M10 in working position
M6, M8 in the nosepiece holder
Hexagon screwdriver WAF 2.5 and WAF 4
2 double open-ended spanners, WAF 24/27
Concealed in housing
100-240 V ~ / 50-60 Hz
18,0 V; 2,1 Ah
GB
23