Fitting On The Selected Nozzle - Dirt Devil Galileo M8000 Manual De Instrucciones

2 Unpacking and assembling
2.4 Fitting on the selected
nozzle
12
13
36
Proceed as follows attach the nozzles:
WARNING:
Danger of injury! Only attach the nozzles if the appliance
is not connected to the power supply. Otherwise the
machine might start up and parts of your body, hair or
pieces of clothing might be sucked in.
ATTENTION:
Use only intact nozzles. Defective nozzles may scratch
or damage surfaces and objects.
NOTE:
Irrespective of whether a nozzle has a click lock or not, it
can be attached to the telescopic tube or handle. To
attach nozzles which don't have a click lock securely, it is
advisable to push them on firmly whilst turning them.
1. If a nozzle is already mounted, pull it off.
NOTE:
If a nozzle with a click lock was attached before, you
have to unlock it before pulling off (Fig. 4/magnifying
glass).
2. Attach the desired nozzle on the lower end of the tele-
scopic tube (Fig. 12) or, if necessary, directly onto the
handle (Fig. 13).
3. For a secure hold of the nozzle, press it forcefully when
sliding the nozzle on and simultaneously turn it back
and forth.
4. Keep the other nozzles safe and inaccessible to chil-
dren.