4 Maintenance
40
41
42
4.4 Cleaning the housing
44
7. Let the filters dry for approx. 24 hours at room tempera-
24 h
ture after cleaning.
ATTENTION:
Only put it back in place when it is completely dry.
8. If the filter is damaged or deformed, replace it (ordering
information
parts').
9. Place the new / cleaned and completely dry exhaust fil-
ter back in its receptacle (Fig. 41).
10. Fit on the exhaust filter cover, starting at the rear.
11. Then press the exhaust filter cover firmly down until you
feel and hear it snap into place (Fig. 42).
NOTE:
Make sure that the hygienic exhaust filter is always prop-
erly in its position and the exhaust filter cover is always
locked completely in place, otherwise the exhaust air will
not be sufficiently filtered.
ATTENTION:
Do not use cleaning or scouring agents or alcohol, as
these might damage the appliance's housing.
Only clean the outside of the housing using a slightly
damp cloth.
Chapter 6.1, 'Accessories and spare