Setting Up The Machine; Connecting The Embroidery Unit; Electrical Connection - Singer EM200 Manual De Instrucciones

CONNECTING THE EMBROIDERY UNIT

There is a covered socket (A) behind the machine. The cover
will open automatically when connecting the embroidery unit.
1. Turn the machine off before connecting the embroidery unit.
2. Slide the embroidery unit onto the arm of the machine until
it plugs fi rmly into the socket.
3. If needed, use the level adjusting feet so that the machine
and embroidery unit are even with one another.
T R E
O EMOVE THE MBROIDERY
Remove the hoop from the machine. (See Page 19)
1. To store the embroidery unit into the box, move the carriage
to park position by selecting Park Position in the Hoop
Option. (See page 22)
2. Turn off the machine.
3. Pull the lever (B) at the left, underneath the embroidery unit
and slide the unit to the left to remove it.
The cover of the socket closes automatically.
4. Store the embroidery unit in the original packing material.
U
NIT
8
S U
ETTING P THE

ELECTRICAL CONNECTION

DANGER
To reduce the risk of electric shock:
Never leave unattended when plugged in. Always
unplug this machine from the electric outlet
immediately after using and before maintenance.
WARNING
To reduce the risk of burns, fi re, electric shock, or
injury to persons:
Do not unplug by pulling on cord. To unplug, grasp
the plug, not the cord.
1. Place machine on stable surface.
2. Connect the power line cord to the machine by inserting
the 2-hole plug into the power cord connector.
3. Connect the power line plug to the electric outlet.
4. Turn on the power switch.
5. The lamps will light up when switch is turned on (symbol I).
6. To disconnect, turn the power switch to the off position (symbol
O), then remove plug from outlet.
FOR UNITED STATES AND CANADA USERS:
POLARIZED PLUG INFORMATION
This appliance has a polarized plug (one blade wider than the
other). To reduce the risk of electric shock, this plug is intended
to fi t in a polarized outlet only one way. If the plug does not fi t
fully in the outlet, reverse the plug. If it still does not fi t, contact
a qualifi ed electrician to install the proper outlet. Do not modify
the plug in any way.
M
ACHINE