Menu level
By accessing the submenu: WEEK-END PROGRAM it is
possible to enable/disable and set the week-end (Saturday -
Sunday) chronothermostat functions.
Activate WEEK-END programming only after deactivating the
weekly programming.
In order to avoid unwanted start and shutdown operations,
activate only one programme at a time.
Deactivate the daily programme if the weekly programme is
required; with this setting it is advisable to deactivate the
week-end programme.
4.6.4 Menu 04 – select language
With this selection it is possible to select the dialogue language from
those available entered in the menu, and namely:
-
ITALIAN
-
FRENCH
-
ENGLISH
-
GERMAN
.............
-
4.6.5 Menu 05 – standby mode
By selecting ON in STANDBY mode the corresponding symbol on the display lights up and the stove shuts down
automatically when the room temperature T has reached the set value (Tset + ΔT) for a given time.
The next restart in automatic will be possible only when the room temperature falls below the set value by a few
degrees and precisely (Tset - ΔT) where ΔT default = 2°C.
With the OFF selection, the modulation function is active but not the STANDBY mode. Therefore when the
temperature exceeds the set value the stove will operate at minimum power.
4.6.6 Menu 06 – buzzer
With this selection it is possible to activate/deactivate stove acoustic signalling.
4.6.7 Menu 07 – initial loading
The setting of LOAD INITIAL allows pellet preloading for a time equal to 90 sec. with the stove off or cold. It is
started with the button P1 and stopped with the button P4.
Button 'P1'
4.6.8 Menu 08 – stove status
With this selection it is possible to display the instantaneous stove status giving the operating status of the various
devices connected to it; various pages placed in succession are available for monitoring.
PROGRAMME 4
Meaning
Selection
Activation time
Deactivation time
Menu level
45
Possible values
Input
Menu level
Menu level
Button 'P4'
OMEGA PLUS