How To Prepare The Machine For Operation - Clarke CFP-130 Manual Del Operador

HOW TO PREPARE THE MACHINE FOR
OPERATION
UNCRATE THE MACHINE
When the machine is delivered, carefully inspect
the shipping carton and the machine for damage. If
damage is evident, save the shipping carton so that
it can be inspected. Contact the Clarke Customer
Service Department.
KNOW YOUR MACHINE (Figure 1)
1 Operator Handle Grips
2 Switch Lever Safety Lock Button
3 Switch Levers - Squeeze - ON / Release -
OFF
4 Handle Release Compression Lever
5 Power Cord
6 Operator Handle
7 Cord Hook
WARNING! This machine contains
moving parts. To reduce
the risk of injury, always
unplug the power cord before
servicing.
INSTALLING THE BRUSH OR PAD HOLDER
Align the lugs with the corresponding slots in the
brush or pad holder and turn the brush or pad
holder counterclockwise to lock it in place (fi gure 2).
To remove brush/pad holder, give it a quick, hard
turn clockwise.
CAUTION! Using the wrong brush or pad
on this machine can damage
the fl oor or overload the
motor.
Clarke
®
Operator's Manual (EN) - CFP Polisher
ENGLISH
1
2
7
4
5
Figure 1
Lugs
Slots
Figure 2
FORM NO. 70880A - 7 -
EN
3
6