Rack - Turbo CREO SL Manual De Usuario

INSTALLING THE FRONT FENDER
12.15
The front fender is mounted directly to the back of the fork crown (Fig. 12.15).
„
The front fender stays are mounted by inserting the stays into the dropout holes and secured using set screws
„
(Fig. 12.16).
When mounting the fenders, the intended result is to have equal spacing (more than 6mm) between the tire and
„
fender along the entire circumference of the fender.
For additional information about installing Plug N Play fenders, please refer to the fender user manual.
Check with your Authorized Specialized Retailer for advice on compatible fenders for your bicycle.
Your CREO SL can be outfitted with a rear rack. All frames feature mounting tabs at the dropouts to support the
vertical rack stays.
12.17
The rear rack is mounted directly to the frame using the lateral dropout holes for the vertical rack stays (Fig.
„
12.17)
37
12.16

12.3. RACK