Symbols; Safety Warnings; General Safety Instructions For Power Tools; Metal Processing - Festool ROTEX RO 90 DX FEQ Manual De Instrucciones

Contents
1 Symbols..................................................... 13
2 Safety warnings.........................................13
3 Intended use..............................................14
4 Technical data........................................... 14
5 Parts of the machine.................................14
6 Operation................................................... 15
7 Settings......................................................15
8 Working with the machine........................ 16
9 Service and maintenance..........................18
10 Accessories............................................... 18
11 Environment.............................................. 18
1

Symbols

Warning of general danger
Warning of electric shock
Read the operating manual and safety
instructions.
Wear ear protection.
Wear a dust mask.
Wear protective goggles.
Connecting the mains power cable
Disconnecting the mains power cable
Pull out the mains plug
Do not dispose of it with domestic
waste.
Safety class II
Tip or advice
Handling instruction
2

Safety warnings

2.1 General safety instructions for power
tools
WARNING! Read all safety warnings, in­
structions, illustrations and specifica­
tions provided with this power tool. Failure to
follow all instructions listed below may result in
electric shock, fire and/or serious injury.
Save all warnings and instructions for future
reference.
The term "power tool" used in the safety in­
structions refers to mains-powered power tools
(with power cable) or battery-powered power
tools (without power cable).
Only for AS/NZS: The tool shall always be
-
supplied via residual current device with a
rated residual current of 30 mA or less.
2.2 Machine-specific safety notices
Harmful/toxic dust may be produced dur­
-
ing your work (e.g. paint containing lead,
certain types of wood and metal). Aontact
with or inhalation of this dust may pose a
risk for the operating personnel or persons
in the vicinity. Comply with the safety regu­
lations that apply in your country. Connect
the power tool to a suitable dust extractor.
Wear a P2 respiratory mask to protect
your health.
Always wear protective goggles to protect
against sanding hazards.
- If potentially explosive or self-igniting dust
is produced during sanding, the machining
instructions issued by the material manu­
facturer must always be followed.
- Prevent liquid polishing agent (polish)
from penetrating the tool. The penetration
of liquid polishing agent (polish) into the
power tool increases the risk of electric
shock.
- If the power tool is dropped or falls, check
for damage to the machine and sanding
pad. Remove the sanding pad for closer
inspection. Have the damaged parts re­
paired before use. Broken sanding pads
and damaged machines can cause injuries
and machine instability.
2.3

Metal processing

When processing metal, the following
measures must be taken for safety reasons:
English
13