Emission Levels; Intended Use; Technical Data; Parts Of The Machine - Festool ROTEX RO 90 DX FEQ Manual De Instrucciones

English
– Install an upstream residual-current circuit
breaker (FIG, PRCD).
– Connect the machine to a suitable dust ex­
tractor.
– Regularly remove dust deposits from the
motor housing of the machine by blowing.
Wear protective goggles.
2.4

Emission levels

The levels determined in accordance with
EN 62841 are typically:
Sound pressure level
Sound power level
Uncertainty
CAUTION
Noise generated when working
Risk of damage to hearing
► Use ear protection.
Vibration emission level a
three directions) and uncertainty K measured in
accordance with EN 62841:
Fine sanding
.
[2]
Uncertainty
Coarse sanding
1.
Uncertainty
Triangular sanding
Uncertainty
The specified emission levels (vibration, noise)
– are used to compare machines.
– They are also used for making preliminary
estimates regarding vibration and noise
load during operation.
– They represent the primary applications of
the power tool.
[2] with W-HT (soft HT).
14
L = 78 dB(A)
PA
L = 89 dB(A)
WA
K = 3 dB
(vector sum for
h
a = 5.0 m/s²
h
K = 1.5 m/s²
a = 5.0 m/s²
h
K = 1.5 m/s²
a = 5.0 m/s²
h
K = 1.5 m/s²
CAUTION
The emission values may deviate from the
specified values. This is dependent on how
the tool is used and the type of workpiece
being machined.
► The actual load during the entire operating
cycle must be evaluated.
► Depending on the actual load, suitable pro­
tective measures must be defined in order
to protect the operator.
3

Intended use

As specified, the machines is designed for
sanding and polishing plastic, metal, wood,
composite materials, paint/clear coats, filler
and similar materials. Materials containing as­
bestos must not be processed.
To guarantee electrical safety, the machine
must not be damp or operated in a damp envi­
ronment. The machine must only be used for
dry sanding.
The user is liable for improper or non-in­
tended use.
4

Technical data

Geared eccentric sander
Power
Speed
Eccentric motion
Rotex rotary motion
Sanding stroke
FastFix sanding pad dia.
Weight as per EPTA procedure
01:2014
5

Parts of the machine

[1-1] Protector
[1-2]
Selector switch/spindle stop
[1-3] On/off switch
[1-4]
Mains power cable
[1-5] Extractor connector
[1-6] Speed control
[1-7] Sanding pad
RO90 DX FEQ
400 W
3000–7000 rpm
220–520 rpm
3.0 mm
D 90 mm
1.45 kg