Preparation Of The Pool And Cleaner; Overview; Packaged Components; Cleaner Features - Pentair PROWLER 917 Guia De Instalacion

2

PREPARATION OF THE POOL AND CLEANER

Overview

Prowler 917 robotic pool cleaners is designed to scrub, vacuum and filter your inground pool. Before operating this
™
product, be sure to read and follow all warning and safety instructions on pages iii-iv.

Packaged Components:

• Cleaner and 15 m communication cable
• Power supply
• Additional pleated basket screens (Qty. 2)
(not shown)

Initial Setup

Before using the cleaner for the first time, complete the following steps:
STEP 1:
Power Supply Placement
Position the power supply at least 3.5 m from the edge
of the pool. See Figure 1.
Figure 1
STEP 2:
Unroll Communication Cable
Unroll the cable and stretch it out completely so that is
has no kinks. See Figure 2.
Figure 2
PROWLER 917 Robotic Inground Pool Cleaner Installation and User' s Guide
™

Cleaner Features:

• Weekly scheduling
• Floor and wall scrubbing
• Top loading basket filtration
• Multiple filtration options - Pleated or mesh
basket panels
STEP 3:
Connect Power Supply to Cleaner
1. Connect the communication cable to the power
supply, ensuring the connector notch is lined up
with the corresponding groove in the power supply.
See Figure 3.
2. Turn the cable connector clockwise to lock the
cable into the power supply. See Figure 3.
Figure 3