Publicidad
Idiomas disponibles
Idiomas disponibles
3.4.
Warning system
The sensors of the warning system must - depending on the capacity of the separator -
be installed on various height levels. The installation measurements are shown in the
pictured table.
Warning system
typ
Clearance
KLsepa.compact
NS3-300
NS3-400T,
NS3-600,
NS6-600
NS6-1300,
NS10-1300
NS10-2000,
NS15-2000
For the installation and maintenance of the warning system please refer to the attached
original operating manual.
Attention: The holes for the mounting set must only be placed at the indicated positions in the
concrete frame. On no account must the separator be damaged or perforated! For the
process of pulling the cables through the empty pipes to the control unit the wall duct must
already be tightened firmly.
3. Assembly and Installation
Oil
Overflow
a
b
[mm]
[cm]
740
1200
920
1550
1070
1500
870
1350
1050
1600
KLsepa.compact
Typenschild
Dichtung
Leerrohr DN 100
Mauerdurchführung
Sensorkabel
34
Publicidad
