Silk’n Flash&Go Instrucciones De Uso página 35

Ocultar thumbs Ver también para Flash&Go:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

EN
appliance is switched off.
• For enhanced safety, it is recommended to install a differential
circuit breaker with a nominal operating differential current that
does not exceed 30 mA (10 mA is ideal) in the electric circuit of
the bathroom. Ask your installer for advice.
ATTENTION: do not use this appliance near bathtubs,
showers, basins or other vessels containing water.
Never place the appliance in water.
• If the appliance is faulty or malfunctions, switch it off and do
not tamper with it. Any repairs must only be carried out by an
authorised technical service centre.
• This appliance is not suitable to be used in the presence of flammable
anaesthetic mixtures with air or Oxygen or Nitrous Oxide.
DO NOT use the appliance with wet hands, damp feet or
barefoot.
• Always disconnect the appliance from the mains supply before
cleaning or performing maintenance and when the appliance is
not in use.
DO NOT pull the power cable or the appliance itself to remove
the plug from the socket.
62
DO NOT expose the appliance to humidity or weather
conditions (rain, sun, etc.).
• If the power cable is damaged it must be replaced by an
authorised technical service centre, so as to prevent all risks.
The device must only be used on human hair. DO NOT use the
device on animals.
DO NOT obstruct the ventilation filters (2).
DO NOT use the appliance if the skin colour sensor is cracked
or broken.
DO NOT use the appliance if the external casing is cracked
or broken.
DO NOT use the appliance if the lamp (6-16) is damaged or if
the treatment surface (6A-16A) is cracked, chipped or missing.
DO NOT use the appliance if the plug (15) is cracked or broken.
• Use the appliance only with the supplied power supply TYpE
KSAPV0361200300D5 (15).
NEVER look directly at the light emitted from the treatment
surface (6A-16A).
NEVER point the treatment surface (6A-16A) whilst emitting
pulsed light towards an empty space.
EN
63

Publicidad

Tabla de contenido
loading

Tabla de contenido