Care Instructions; Taking Care And Cleaning The Stimulator; Maintenance And Use Of Electrodes And Cables - Globus ELITE Manual De Uso

CARE INSTRUCTION

Taking care and cleaning the stimulator

- In case of damage of the covering apparatus, this has to be replaced.
- In case of real or presumed spoilt, do not make any repairs by yourself. Only authorized cen-
tres can carry out repairs.
- Do not give a shock to the product by clashing, overturning or shaking. It may cause trouble
or accident in a long run although no immediate trouble occurs.
- Store the electro stimulator at a place free from a wet areas and water. Avoid installing in pla-
ces subject to humidity, high temperature, dust or places exposed to direct sunbeam or near to
sources of high electromagnetic emission: The stimulator must be used free and not wrapped
or covered.
- Do not use thinner, gasoline, kerosene, cleaning powder or chemicals; for cleaning the machi-
ne and the cables, it is sufficient a soft duster lightly humid.
- After a long period of no use, it is advisable to check the correct working of the stimulator and
of the battery. (Contact authorized centres).
- Do not use the apparatus during the battery rechargement.
- The stimulator is connected to the electricity by means of the apposite feeder. Before the con-
nection check that electric system is complied with the requirements in force in your country.
- It is advisable not to use the apparatus together with other electronic equipment above all those
used for support of vital functions.

Maintenance and use of electrodes and cables

Before placing the electrodes on your body, be sure to always wash and dry the skin in order to ensu-
re good conductivity.
After the use of the reusable mono-user electrodes, store them in the apposite seat and insert in
a plastic bag cleaned and closed.
Check that there is no contact or overlapping among the electrodes.
The electrodes can be used for 25/30 applications.
If the electrodes loose their conductivity and adhesion, they could be old and need replacement
In case of use of electrodes not adhesive, it is advisable to clean the surface with water.
Use only the electrodes recommended by the supplier.
Be sure that the cables and electrodes are cleaned before any application.
In case of cable deterioration, replace them with original spare parts.
42
Multi_Elite_Mystim_Rev. 11_09 data di emissione 06_09_2010